.. _examples:

Examples
===================

Wind steps from cut-in to cut-out at full wake direction on an array of 4xIEA-15MW-RWT at 5D
-------------------

* use input file dtu_wpp_ctrl_input_test_wind_steps.yaml

.. image:: images/wind_steps_case_results.png
  :width: 700

Wind direction ramp from full wake, to +30deg, and back at full wake direction on an array of 4xIEA-15MW-RWT at 5D
-------------------

* use input file dtu_wpp_ctrl_input_test_dir_ramp.yaml

.. image:: images/wind_dir_ramp_case_results.png
  :width: 700

Impact of erosion level on an array of 4xIEA-15MW-RWT at 5D with 48h inflow data from Horns Rev
-------------------

* use input file dtu_wpp_ctrl_input.yaml with 'erosion: 0.0' and 'erosion: 1.0' 

.. image:: images/erosion_case_results.png
  :width: 700

Impact of erosion safe mode (20% derating) on an array of 4xIEA-15MW-RWT at 5D with 48h inflow data from Horns Rev
-------------------

* use input file dtu_wpp_ctrl_input.yaml with 'P_wpp_ref: 1.0' and 'P_wpp_ref: 0.8'

.. image:: images/esm_case_results.png
  :width: 700

Impact of erosion safe mode (20% derating) combined with sector-based yaw misalignment on an array of 4xIEA-15MW-RWT at 5D with 48h info data from Horns Rev
-------------------

* use input file dtu_wpp_ctrl_input.yaml
* set 'P_wpp_ref: 0.8' and uncomment 'yaw misalignment control' section and 'yaw_ctrl_yaw_mis = 20.0'

.. image:: images/yaw_ctrl_case_results.png
  :width: 700